Insignia NS-CLOPP1 Clock User Manual


 
Setting the time
1 Press Sleep for about two seconds until the
hour digits blink on the LCD.
2 Press or to increase the hour or press or
to decrease the hour. Make sure that AM or PM
displays correctly.
3 Press Sleep again. The minutes digits blink on
the LCD.
4 Press
or
to increase the minutes or press
or
to decrease the minutes.
5 Press Sleep again to save the time setting and
exit time setting mode.
Setting the alarm sound
1 Press (Alarm 1)
or
(Alarm 2).
The or
icon blinks on the LCD.
2 To use the radio as the alarm sound, press
(Alarm 1) or (Alarm 2) once. Wait three
seconds to save the setting and exit alarm sound
setting mode.
OR
To use the buzzer as the alarm sound, press
(Alarm 1) or (Alarm 2) twice. Wait three
seconds to save the setting and exit alarm sound
setting mode.
3
To completely turn o the alarm, press (Alarm 1)
or
(Alarm 2) repeatedly until the or
icon disappears from the LCD.
Setting the alarm time
1 Press and hold (Alarm 1) or (Alarm 2) for
about two seconds until the hour digits blink on
the LCD.
2 Press or to increase the hour or press or
to decrease the hour.
3
Press (Alarm 1) or (Alarm 2) again. The
minutes digits blink on the LCD.
4 Press or to increase the minutes or press
or to decrease the minutes.
5 Press (Alarm 1) or (Alarm 2) again. The
Volume icon appears in the center of the LCD
and the volume digits blink.
6 Press or to increase the alarm volume or
press or to decrease the alarm volume.
7 Press (Alarm 1) or (Alarm 2) again to save the
time setting and exit alarm setting mode.
Turning o your alarm
• Press any button but (SNOOZE/DIMMER).
Using the snooze feature
• When the alarm sounds, press (SNOOZE/DIMMER).
The alarm turns o for 10 minutes and SNOOZE
appears on the LCD.
Setting the sleep timer
• Press Sleep repeatedly to select the amount of
time you want your radio to wait before it turns o
automatically. You can select 15, 30, 45, 60, or 90
minutes. The time you select and the SLEEP icon
appear on the LCD.
To turn o the sleep timer, press Sleep
repeatedly
until
00 appears and the SLEEP icon disappears.
Connecting an audio device
1
Plug an audio cable with a 3.5 mm connector (not
included) into the AUX IN jack on the back of your
radio and into the audio out jack on your audio device.
2 Press Source to turn on your radio, then press
Source
repeatedly until AUX appears on the LCD.
3 Use the controls on the audio device to control
playback.
Playing your radio
1 Make sure that you have connected the AC power
adapter.
2 Press Source . Your radio turns on.
3 Press or to manually select a radio frequency.
OR
Press and hold or to automatically tune to
the next lower or higher radio station.
4 Press or to increase or decrease the volume.
5 To turn o your radio, press and hold Source for
two seconds.
V4 ENGLISH 12-1279
For more information about using your radio, see your User Guide.
90-day limited warranty
See your User Guide or visit www.insigniaproducts.com for details.
© 2013 BBY Solutions, Inc. All rights reserved.
SNOOZE / DIMMER
SNOOZE / DIMMER
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1 2