Filter
Top Products
22 IP Media Server (Global Call) Demo Guide — August 2005
Running the Demo
Example
The following example shows how to launch the demo from a command line with options:
IPMediaServer -n64 -cmyconfig.cfg -ea
This command launches the demo with 64 channels, using the myconfig.cfg configuration file and
A-law encoding.
4.3 Using the Demo
This section describes how to use the IP Media Server (Global Call) demo and contains the
following topics:
• Keyboard Commands
• Using the Media Server
4.3.1 Keyboard Commands
The demo always waits for input from the keyboard. While the demo is running, you may enter any
of the commands listed in Table 4.
4.3.2 Using the Media Server
The IP Media Server (Global Call) demo allows the caller to interact with a series of voice menus,
using the telephone keypad to enter an option. Basic operations include playing a pre-recorded
message, recording a new message, and barge-in for CSP. Each menu prompts the caller to select
an action by pushing a key. The call state within which the menu is called is indicated by the square
brackets. Figure 1 shows the voice prompt flow, grouping the prompts by feature (voice, CSP).
Main Menu [Main_Menu]
1 - Voice Mail
3 - Conferencing (not supported in HMP 1.x)
4 - CSP Barge-in
* - Quit
-n<n> Sets the number of channels The lesser of Voice Devices
or IP devices
-q Activates Quality of Service Disabled
Table 3. Command Line Switches (Continued)
Table 4. Runtime Keyboard Commands
Command Function
q or Q or Ctrl+c Terminates the application