Filter
Top Products
GB2.book : GB203 15 Tue Oct 27 13:01:06 1998
15
C H A P T E R 3 Configure the module and connect the cables
7 Repeat steps 2 through 6 for the second 1000Base Module,
ensuring that the cabling from this 1000Base Module goes to
the other Matrix Module.
8 Plug the SC connectors on the fiber optic cables into the RX and
TX sockets, and connect the other end of the cables to a device
or group of switches with redundancy.
9 Check the LEDs on the 1000Base Modules to verify the links.
For more information on LEDs, see Chapter 2
Link Aggregation with Two Modules
Introduction Two modules installed in a stack can be link aggregrated to increase
bandwidth between this stack and another device or stack.
Prevent network loops Link aggregation must be configured in Intel Device View to prevent
a loop. When two modules are installed in a stack and connected to
another single device or stack (without redundancy or link aggrega-
tion), then a loop may be created. Note that even with spanning tree
enabled, a delay of 10 to 15 seconds may occur before the loop is dis-
covered.
12345678
Power
Reset
Status
Temperature
RPS
Intel Express
550T Routing
Switch
Console
9600-8-N-1
Slot B
Port Status
Slot A
StackInterface Modulefor 500 Series Switches
StackInterface Modulefor 500 Series Switches
12345678
Power
Reset
Status
Temperature
RPS
Intel Express
550T Routing
Switch
Console
9600-8-N-1
Slot B
Port Status
Slot A
StackInterface Modulefor 500 Series Switches
StackInterface Modulefor 500 Series Switches
12345678
Power
Reset
Status
Temperature
RPS
Intel Express
550T Routing
Switch
Console
9600-8-N-1
Port Status
Slot A
StackInterface Modulefor 500 Series Switches
1234 78
Power
Reset
Status
Temperature
RPS
Intel Express
550T Routing
Switch
Console
9600-8-N-1
Port Status
Slot A
1740
12345678
Power
Reset
Status
Temperature
RPS
Intel Express
550T Routing
Switch
Console
9600-8-N-1
Slot BSlot A
Port Status
MatrixModule for 500 Series Switches
4
1
5
2
6
3
StackInterface Modulefor 500 Series Switches
12345678
Power
Reset
Status
Temperature
RPS
Intel Express
550T Routing
Switch
Console
9600-8-N-1
Slot BSlot A
Port Status
StackInterface Modulefor 500 Series Switches
MatrixModule for 500 Series Switches
4
1
5
2
6
3
Switches
Slot B
56
Slot B
StackInterface Modulefor 500 Series
Primary
Secondary
3
4
5
6
Connects to
Matrix Module in
secondary switch
Connects to
Matrix Module in
primary switch
1000SX SST Module for 500 Series Switches
CLASS 1 LASER PRODUCT
1000Base-SX
Stack Interface Module
1000SX SST Module for 500 Series Switches
CLASS 1 LASER PRODUCT
1000Base-SX
Stack Interface Module