Filter
Top Products
2
Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF
78-11070-02, Rev. H0
System Requirements
System Requirements
This section describes the system requirements for Release 12.1(2)XF5 and includes the following
sections:
• Memory Requirements
• Hardware Supported, page 2
• Determining Your Software Release, page 3
• Upgrading to a New Software Release, page 3
• Feature Set Tables, page 4
Memory Requirements
This section describes the memory requirements for the Cisco IOS feature sets supported by Cisco IOS
Release 12.1(2)XF5 on the Cisco 811 and 813 Routers.
Hardware Supported
Cisco IOS Release 12.1(2)XF5 supports the following Cisco 800 series routers:
• Cisco 811
• Cisco 813
For detailed descriptions of new hardware features, see New and Changed Information, page 6.
Table 1 Memory Requirements for the Cisco 811 and 813 Routers
Platforms Image Name Image
Required
Flash
Memory
Required
DRAM
Memory
Runs
From
Cisco 811
and 813
IP c800-y6-mw 4 MB 8 MB RAM
IP Plus c800-sy6-mw 4 MB 8 MB RAM
IP/IPX Plus c800-nsy6-mw 4 MB 8 MB RAM
IP/FW c800-oy6-mw 4 MB 8 MB RAM
IP/FW Plus IPSec 56 c800-osy656i-mw 8 MB 8 MB RAM
IP/IPX/FW Plus IPSec 56 c800-nosy656i-mw 8 MB 8 MB RAM
Table 2 Supported Interfaces for the Cisco 800 Series
Router Ethernet LAN Ports Ethernet WAN Ports
Analog Phone
Ports
Console
Ports
Cisco 811 One 10BaseT (RJ-45) • One ISDN BRI U,
integrated DSU (RJ-11),
• One ISDN BRI S/T (R-J45)
– RJ-45
Cisco 813 One 10BaseT (RJ-45)
4-port hub
• One ISDN BRI U,
integrated DSU (RJ-11),
• One ISDN BRI S/T (R-J45)
Two (RJ-11) RJ-45