Intel Server Control Installation Guide
7
CAUTION
To prevent data loss, do not attempt to run the installation utility from any
device other than the HP Server cc3300 & cc2300 User Information,
Diagnostics and Utilities Resource CD
1. Disable all system features that prevent writing to the hard drive boot sector.
2. Insert the HP Server cc3300 & cc2300 User Information, Diagnostics & Utilities Resource CD
into the CD drive.
3. Restart the server.
4. When the “F2 to enter setup” message appears, quickly press F2 to enter Setup.
5. In Setup, use the arrow keys to select the Boot menu.
6. Use the arrow keys to select Boot Device Priority then press Enter.
7. Select ATAPI CDROM and use the + key to move the selection to the top of the list.
8. Press F10.
9. Select Yes to confirm saving of the current settings and press Enter. The server restarts and
boots from the HP Server cc3300 & cc2300 User Information, Diagnostics & Utilities Resource
CD.
10. When the menu appears, use the arrow keys to select the Utilities menu and press Enter.
11. Select Run Service Partition Administrator and press Enter.
12. Choose item 3 - Create service partition (first time).
13. Follow the instructions on your screen to select the hard drive for service partition installation.
14. The utility creates the service partition and prompts that it will reboot the server when you
press any key.
15. The server reboots from the HP Server cc3300 & cc2300 User Information, Diagnostics &
Utilities Resource CD .
16. When the menu appears, use the arrow keys to select the Utilities menu and press Enter.
17. Select Run Service Partition Administrator and press Enter.
18. Choose item 4 - Format service partition and install software.
19. Follow the instructions on the screen to format the service partition and install the partition
software.
20. Quit the menu.
21. Remove the HP Server cc3300 & cc2300 User Information, Diagnostics & Utilities Resource
CD from the drive.
22. You can now install the user operating system.
NOTE
More information about the service partition can be found in the Service
Partition Administration utility.
Boot the Server from the Service Partition
Boot the server from the service partition to run the utilities found on the service partition. You can
reboot a server: