Filter
Top Products
Copyright © 2002 Intel Corporation. Order Number: 284358-001
All rights reserved. 0202/MS/VC
Information in this document is provided in connection with Intel
®
products. No license, express or implied, by estoppel or otherwise, to any intellectual property
rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel
disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life
sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
The Intel
®
Desktop Boards D845GLLY and D845GLAD may contain design defects or errors known as errata, which may cause the product to deviate from
published specifications. Current characterized errata are available on request.
Intel, Pentium, Intel NetBurst, and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other
countries.
* Other names and brands may be claimed as the property of others.
** Intel
®
Desktop Board D845GLAD supports DDR SDRAM memory and Intel® Desktop Board D845GLLY supports PC133 SDRAM memory. Currently
validated to 1.0GB using 256Mb technology. For latest validate memory support, visit http://developer.intel.com/support/motherboards/desktop/
*** Not supported on all operating systems. See product guide for details.
Ordering Information—See Intel’s Web site at www.intel.com
For the most current product information available, visit Intel’s Web site at:
developer.intel.com/design/motherbd/
Processor
Processors Supported Intel
®
Celeron
®
Pentium
®
4 processors with Intel
®
(via mPGA478 connector) NetBurst™ microarchitecture including a
400MHz system bus in the mPGA478-pin
package and supporting frequencies starting
at 1.4 GHz
Intel
®
845GL Chipset Intel
®
845GL Graphics Memory Controller
Hub (GMCH) with Accelerated Hub
Architecture bus
Intel 82801DB I/O Controller Hub (ICH4)
with Accelerated Hub Architecture bus
Intel 82802AB Firmware Hub (FWH)
Graphics Memory
Controller Hub (GMCH) Designed to support up to 2GB** (w/512Mb
technology) of DDR266/200 SDRAM memory
(D845GLAD) or PC133 SDRAM (D845GLLY)
ICH4 I/O Controller Hub Ultra ATA/66/100
Ultra DMA/33
Allows support of four PCI bus masters
I/O Features Integrated super I/O LPC bus controller
Four PCI local bus slots
Power management support for ACPI 1.0
PC2001 compliance
USB 2.0*** • Two back panel ports (one dual stack)
• Two front panel ports (header requiring
cable to front panel)
Firmware Hub
System BIOS 4-Mb Flash EEPROM with Intel/AMI* BIOS
featuring plug-and-play, IDE drive auto-configure
Advanced configuration and power interface
V1.0b, DMI 2.0, multilingual support
Intel
®
Rapid BIOS Boot Optimized POST for faster access to PC
from power-on
Audio Solution Sigmatel STAC9750 AC97 compliant
integrated audio solution
System Memory
Memory Capacity Two 184-pin DIMM connectors supporting
up to two double-sided DIMMS (D845GLAD)
Two 168-pin SDRAM connectors supporting
up to two double-sided DIMMS (D845GLLY)
Memory Type DDR266 SDRAM OR DDR200 SDRAM
(D845GLAD) PC133 SDRAM (D845GLLY)
Memory Voltage 2.5V DDR memory (D845GLAD)
3.3V SDRAM memory (D845GLLY)
Wake-Up From Network
Wired for Management (WfM) 2.0 compatible
Support for system wake up using an add-in
network interface card with remote wake-up
capability or PCI
Expansion Capabilities
Four PCI bus add-in card connectors
Jumpers and Front Panel
Connectors Jumpers Single configuration jumper design
Jumper access for BIOS configuration mode
Single Front panel USB wake configuration
jumper
Jumper allows user to enable ACPI wake
from front panel USB devices
Front Panel Connector Reset, HD LED, Power LEDs, power on/off,
standby header
Mechanical
Board Style uATX 1.0 compliant board size
Board Size 9.2" x 8.2"
Baseboard Power
Requirements ATX12V or SFX12V
Environment
Operating Temperature 0° C to +55° C
Storage Temperature -40° C to +70° C
Regulations
Safety Regulations
U.S. and Canada UL 1950—CSA 950-95
U.S. and Canadian recognition component marks
Europe UL classified to IEC 950
EMI/RFI regulations:
Intended for use in systems meeting the following EMI/RFI regulations:
US FCC Class B (DofC - Cover off testing)
Canada IC Class B
Europe EU Class B (Res, Com, Light Industry)
Japan VCCI, Class B (ITE)
Power requirements vary. Complies with US CRF via EN55022 + 6db in
system configurations with an open chassis and EU Directive 89/336/EEC
and use via EN55022 and EN50082-1 in a representative chassis.
Intel
®
Desktop Boards D845GLAD and D845GLLY Technical Specifications