Filter
Top Products
Intel Desktop Board D915GEV/D915GUX/D915GAV/D915GAG Product Guide
32
Installing and Removing a Processor
Instructions on how to install the processor to the desktop board are given below.
Installing a Processor
CAUTION
Before installing or removing the processor, make sure AC power has been removed by unplugging
the power cord from the computer; the standby power LED should not be lit (see Figure 4 on
page 25). Failure to do so could damage the processor and the board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 27.
2. Open the socket lever by pushing the lever down and away from the socket (see Figure 7, A
and B).
A
B
Figure 7. Lift Socket Lever
3. Lift the load plate. Do not touch the socket contacts (see Figure 8, C and D)
D
C
D
Figure 8. Lift the Load Plate and Don’t Touch the Socket Contacts