Filter
Top Products
Installing and Replacing Desktop Board Components
41
Connecting IEEE 1394a Headers
Before connecting the IEEE 1394a headers, observe the precautions in "Before You Begin" on
page
23. See Figure 20, B on page 39 for the location of the blue IEEE 1394a headers. Table 8
shows the pin assignments for the headers.
Table 8. IEEE 1394a Header Signal Names
Pin Signal Name Pin Signal Name
1 TPA1+ 2 TPA1-
3 Ground 4 Ground
5 TPA2+ 6 TPA2-
7 +12 V 8 +12 V
9 Key (no pin) 10 Ground
Connecting the Front Panel Header
Before connecting the front panel header, observe the precautions in "Before You Begin" on
page
23. See Figure 20, E on page 39 for the location of the multi-colored front panel header.
Table 9 shows the pin assignments for the front panel header.
Table 9. Front Panel Header Signal Names
Pin Signal In/Out Description Pin Signal In/Out Description
Hard Drive Activity LED (Orange) Power LED (Green)
1 HD_PWR Out Hard disk LED pull-
up (330 Ω) to +5 V
2 HDR_BLNK_GRN Out Front panel green
LED
3 HDA# Out Hard disk active LED 4 HDR_BLNK_YEL Out Front panel yellow
LED
Reset Switch (Purple) On/Off Switch (Red)
5 Ground Ground 6 SWITCH_ON# In Power switch
7 FP_RESET# In Reset switch 8 Ground Ground
9 5+ V
Reserved. Do not use.
10 No pin No pin
Connecting Hi-Speed USB 2.0 Headers
Before connecting the USB 2.0 headers, observe the precautions in "Before You Begin" on
page
23. See Figure 20, F on page 39 for the location of the black USB 2.0 headers.
Table 10 shows the pin assignments for the headers.
Table 10. Hi-Speed USB 2.0 Header Signal Names
USB Port A USB Port B
Pin Signal name Pin Signal name
1 Power 2 Power
3 D- 4 D-
5 D+ 6 D+
7 Ground 8 Ground
9 Key 10 No connect
Note: USB ports may be assigned as needed.