Filter
Top Products
DBPXA250 and DBPXA210 Development Platforms Specification Update 11
Summary of Changes
3 X 21 No Fix “PLL Voltage Too High”
4 X 22 No Fix “Remove Coin Cell Battery”
5 X 22 No Fix “Incorrect Boot Mode Selected For PXA210 Processor”
Table 1. Minimal Required ECOs for Intel® PXA250 and PXA210 Processor Cards and
Intel® BBPXA2xx Baseboards with B1 and B2 Silicon
Platform B1 Stepping B2 Stepping
BBPXA2xx Rev B 10,11, 12, 14,15 10,11, 12, 14,15
DCPXA250 D/C Rev C 3, 6, 7, 8, 9, 10, 13 3, 6, 7, 8, 9, 10, 13
DCPXA250 D/C Rev D 7, 9, 10, 13 7, 9, 10, 13
DCPXA250 D/C Rev E — —
DCPXA250 D/C Rev F — —
DCPXA210 D/C Rev A 1, 2, 3, 4, 51, 2, 3, 4, 5
NOTE: Intel recommends that customers should have the minimum platform revisions as listed below:
• B1 silicon or later
• Rev C DCPXA250 processor cards
†
• Rev A DCPXA210 processor cards
• Rev B BBPXA2xx Development Baseboards
†
Rev F DCPXA250 processor cards are recommended for systems using 100-MHz SDRAM
Summary of DCPXA210 Processor Card ECOs (Sheet 2 of 2)
ECO NO. Rev A Refer to: Status ECO Description