Intel FSB800 / DDR400 (PC3200) Computer Hardware User Manual


 
Introduction
Page 1-3
- Upstream hub link for access to the MCH
- 2-Channel Ultra ATA/100 Bus Master IDE controller
- USB controller
- I/O APIC
- SMBus controller
- LPC / Flash BIOS interface
- PCI 2.3 interface
- Integrated System Management Controller
Accelerated Graphics Port (AGP)
The board provides the AGP 3.0 interface. The AGP interface can support external
AGP slot with AGP 8X/4X and Fast Write Transactions. The AGP Interface Specifi-
cation revision 3.0 enhances the functionality of the original AGP Interface Specifi-
cation by allowing 8X data transfers (8 data samples per clock) and 1.5 volt (Power
supply) operation. Supports Maximum AGP interface bandwidth 2.1GB/s. (1.5 volt
AGP Card supports only).
Ultra ATA/66/100
The ICH5/R provides an Ultra ATA/66/100 Bus Master IDE controller. This controller
supports Ultra ATA/66/100 protocols which are ideal for supporting demanding
applications such as real-time video, multimedia, and a high performance operating
system. A new IDE cable is required for Ultra ATA/66/100. This cable is an 80-pin
conductor cable, which is backwards compatible with ATA/33 connectors.
Hardware Monitoring
Hardware monitoring enables you to monitor various aspects of the system operation
and status. The features include CPU temperature, voltage and fan speed in RPMs.
LAN (Optional)
The motherboard mounts the LAN chipset. It allows the mainboard to connect to a
local area network by means of a network hub.