Filter
Top Products
35
3-10 PC Health Status
This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
PC Health Status
Help Item
PC Health Status
Smart FAN Configuration Press Enter
H/W Health Function Enabled
CPU Temperature: 50
°
C/122
°
F
System Temperature: 60
°
C/140
°
F
CPUFAN Speed: 2923RPM
SYSFAN1 Speed: N/A
SYSFAN Speed: N/A
Vcore 1.242v
NB1.1V : 1.160V
+5V 5.045V
+12V 11.440v
5VSB 4.961v
VDIMM : 1.468V
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Discard Changes F6:Fail-Safe Defaults F7:Optimized Defaults
H/W Health Function,
it displays information list below when set as below. The choice is either Enabled or
Disabled.
CPU Temperature/ System Temperature/CPUFAN/SYSFAN1 Speed/SYSFAN2 Speed
/Vcore/NB 1.1V/+5V/+12V/5V SB/VDIMM
This will show the CPU/ /System voltage chart and FAN Speed, etc.
3-10-1 Smart FAN Configuration
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Smart FAN Configuration
Help Item
FAN1 Mode Setting Auto Fan by RPM
Temperature1 Limit of Highest 050
Temperature1 Limit of Second 040
Temperature1 Limit of Third 030
Temperature1 Limit of Lowest 020
FAN1 Highest Setting 100
FAN1 Second Setting 080
FAN1 Third Setting 070
FAN1 Forth Setting 060
FAN1 Lowest Setting 050
F
an Configuration Mode
Setting
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Discard Changes F6:Fail-Safe Defaults F7:Optimized Defaults
Smart FAN Configurations FAN1 Mode Setting
The optional settings are: Auto Fan by RPM; Auto Fan by Dutycycle; Manual Mode by RPM
and Manual Mode by Dutycycle.