Filter
Top Products
PCM-9586 User’s Manual 42
Chapter 5 PCI Graphic Setup
5.1 Introduction
The PCM-9586 has an onboard PCI/AGP flat panel/VGA interface. The
specifications and features are described as follows:
5.1.1 Chipset
The PCM-9586 uses a Intel 852GM (Extreme Graphics 2) chipset for its
graphic controller. It supports LVDS LCD displays, conventional analog
CRT monitors, DVI connection, and TV-out function.
5.1.2 Display memory
The 852GM system m chip can support up to 64MB dynamic frame
buffer shared with system memory; the VGA controller can drive CRT
displays up to 1600 x 1200 at 85-Hz and 2048 x 1536 at 75-Hz, color
panel displays in LVDS model with resolutions up to UGXA panel reso-
lution with frequency range from 25 MHz to 112 MHz, or DVI model at a
pixel resolution up to 1600 x 1200 at 85 Hz.
5.1.3 Display types
CRT and panel displays can be used simultaneously. The PCM-9586 can
be set in one of six configurations: CRT only, LVDS only, both CRT and
LFP (LVDS), EFP (DVO to DVI), TV, both CRT and EFP (DVO to
DVI). The system is initially set to simultaneous display mode - CRT and
LFP (LDVS). If you want to enable other display mode, please set up
manually. Set up example is shown as in the following chapters.