BIOS SETUP
MB893 User’s Manual 31
Advanced BIOS Features
This section allows you to configure and improve your system and
allows you to set up some system features according to your preference.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
CPU Feature
Hard Disk Boot Priority
Press Enter
Press Enter
ITEM HELP
Virus Warning Disabled Menu Level
CPU L1 and L2 Cache
Hyper-Threading Technology
Enabled
Enabled
Quick Power On Self Test Enabled
First Boot Device Floppy
Second Boot Device Hard Disk
Third Boot Device CDROM
Boot Other Device
Swap Floppy Drive
Enabled
Disabled
Boot Up Floppy Seek
Boot Up Numlock Status
Disabled
On
Gate A20 Option Fast
Typematic Rate Setting Disabled
Typematic Rate (chars/Sec) 6
Typematic Delay (Msec) 250
Security Option Setup
Allows you choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled
and someone
attempt to write data
into this area, BIOS
will show a warning
message on screen
and alarm beep
APIC Mode Enabled
MPS Version Control for OS 1.4
OS Select For DRAM>64MB
Report No FDD For WIN 95
Non-OS2
Yes
Console Redirection Enable
Baud Rate 19200
Baud Rate 19200
Agent connect via NULL
Agent wait time(min) 1
Agent after boot Disabled
Report No FDD For WIN 95 Yes
Small Logo (EPA) Show Enabled
Hard Disk Boot Priority
This item allows you to set the priority for hard disk boot. When you
press enter, the selections shows the current hard disks used in your
system as well as the “Bootable Add-in Card” that is relevant to other
boot sources media such as SCSI cards and LAN cards.
Virus Warning
This item protects the boot sector and partition table of your hard disk
against accidental modifications. If an attempt is made, the BIOS will
halt the system and display a warning message. If this occurs, you can
either allow the operation to continue or run an anti-virus program to
locate and remove the problem.