Filter
Top Products
INSTALLATIONS
JBAT1: Clear CMOS Contents
Use JBAT1, a 3-pin header, to clear the CMOS contents. Note that the
ATX-power connector should be disconnected from the motherboard
before clearing CMOS.
JBAT1 Setting Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear CMOS
JP1: Select the Boot Device (Factory used only)
JP1 Setting Boot Device
Pin 1-2
Short/Closed
SPI
Pin 1-2
Open
FWH (default)
JP5: Configure and Recovery (Factory use only)
JBAT1 Setting Function
Pin 1-2
Short/Closed
Configure
Pin 2-3
Short/Closed
Normal (default)
Open
Recovery
10 MB898 User’s Manual