Filter
Top Products
Intel® Modular Server System MFSYS25, Intel® Modular Server System MFSYS35, Intel® Compute
Module MFS5000SI
Number (i.e. 1)
This hard drive has been tested and is supported under the operating system
identified by the operating system identification number.
remain the property of the IHV (Intel cannot provide copies of these reports).
Table 5.2 Tested Hard Drives
Manufacturer
Product
Family
Model Number RPM
Drive
Size
(GB)
Drive
FW
Level
(a)
Tested
Operating
System
Notes
MFSYS25, 2.5” SAS Hard Drives
Seagate Savvio 2.5” ST9300603SS 10,000 300GB 0002 1,2,3,4,5 Added March 2009
Seagate Savvio 2.5” ST9146802SS 10,000 146GB 0003 1,2,3,4,5 SD
Seagate Savvio 2.5” ST973402SS 10,000 73GB 0003 1,2,3,4,5
Seagate Savvio 2.5” ST936751SS 15,000 36GB 0001 1,2,3,4,5
Seagate Savvio 2.5” ST973451SS 15,000 73GB 0001 1,2,3,4,5 SD
Fujitsu AL-10SE MBB2147RC 10,000 146GB 0110 1,2,3,4,5
Chassis must be at UFU
P2.6 FW level
Fujitsu AL-10Sx MBB2073RC 10,000 73GB 0110 1,2,3,4,5
Chassis must be at UFU
P2.6 FW level
Fujitsu AL-10Sx MBC2036RC 15,000 36GB 1,6,7
Chassis must be at UFU
P2.6 FW level
Fujitsu AL-10Sx MBC2073RC 15,000 73GB 1,6,7
Chassis must be at UFU
P2.6 FW level
MFSYS35, 3.5” SAS Hard Drives (b)
Seagate Cheetah ST3450856SS 15,000 450GB 0004 1,2,3,4,5
Seagate Cheetah ST3300656SS 15,000 300GB 0004 1,2,3,4,5
Seagate
Barracuda
ES2*
ST31000640SS 7,200 1TB 0003 1,2,3,4,5
Added March 2009
Seagate
Barracuda
ES2*
ST3750630SS 7,200 750GB 0002 1,2,3,4,5
Fujitsu
MBA
Series
MBA3300RC 15,000 300GB 0103 1,2,3,4,5
Chassis must be at UFU
P2.6 FW level
MFSYS35, 3.5” SATA Hard Drives *
Seagate
Barracuda
ES2*
ST3500320NS 7,200 500GB SN05 1,2,3,4,5
Hitachi
Ultrastar
A7K1000
HUA721050KLA
330
7,200 500GB BOA 1,2,3,4,5
(a) Firmware revisions listed in this column are the minimum revision levels supported. As they become available,
listed drives with newer revisions of firmware are also supported. OEM specific versions of drive firmware are not
supported. Mixed firmware levels within the same storage pool is not supported.
(b) MFSYS35 currently does not support a mix of SAS and SATA drives within the same chassis. All drives within the
MFSYS35 subsystem must have the same interface.
Revision 1.9
19