Filter
Top Products
Chapter 2 Hardware Configuration
Page: 2-14
PCI-471LF USER
′
S MANUAL
2-19. SYSTEM FAN CONNECTOR
JSFAN1 : System Fan connector
The pin assignment is as follows:
PIN ASSIGNMENT
1 GND
2 +12V
3 FAN0
2-20. CLEAR CMOS DATA SELECTION
JP10 : Clear CMOS Data Selection
The selections are as follows :
FUNCTION
JUMPER SETTING
(pin closed)
JUMPER
ILLUSTRATION
Clear CMOS 2-3
Normal 1-2
*** Manufacturing Default is set as Normal.
Note: To clear CMOS data, user must power-off the computer and set the jumper to
“Clear CMOS” as illustrated above. After five to six seconds, set the jumper
back to “Normal” and power-on the computer.
1
JSFAN1