9
(6) Audio Line-In, Lin-Out, MIC Connector:
SURROUND1
This Connector is 3 phones Jack for LINE-OUT, LINE-IN, and MIC
Line-out: (GREEN)
Audio output to speaker
Line-in: (BLUE)
Audio input to sound chip
MIC: (PINK)
Microphone Connector
(7) Floppy drive Connector (34-pin block): FLOPPY
This connector supports the provided floppy drive ribbon cable. After connecting the
single plug end to motherboard, connect the two plugs at other end to the floppy drives.
(8) Primary IDE Connector (40-pin block): IDE
This connector connects to the next set of Master and Slave hard disks. Follow the
same procedure described for the primary IDE connector. You may also configure two
hard disks to be both Masters using one ribbon cable on the primary IDE connector and
another ribbon cable on the secondary IDE connector.
z
Two hard disks can be connected to each connector. The first HDD is referred to
as the “Master” and the second HDD is referred to as the “Slave”.
z
For performance issues, we strongly suggest you don’t install a CD-ROM or
DVD-ROM drive on the same IDE channel as a hard disk. Otherwise, the system
performance on this channel may drop.
Floppy Drive Connector
Pin 1
FDD
Line-OUT
MIC-IN
Line-IN
PS/2
Mouse
PS/2
Keyboard
COM
VGA
USB1
LAN