Intel PRO/1000 T Network Card User Manual


  Open as PDF
of 2
 
Special Note: The PRO/1000 T IP Storage Adapter and the target
device (Cisco® 5420 or IBM® 200i) must be on the same level of
iSCSI specification to communicate.
11. Tape SCSI devices are not currently supported.
12. Servers with greater than 2.5 gigabytes of physical RAM are not
supported in this release.
13. When changing the adapter configuration between static IP
addresses and dynamic IP addresses through DHCP, you must
reboot the server after making the change in the configuration
application.
Late-Breaking News
Page 2
Copyright © 2002, Intel Corporation. All rights reserved.
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
Intel Corporation assumes no responsibility for errors or omissions in this document. Nor
does Intel make any commitment to update the information contained herein.
* Other product and corporate names may be trademarks of other companies and are used
only for explanation and to the owners’ benefit, without intent to infringe.
 previous