Filter
Top Products
SyAM Software* Comprehensive Installation Guide for Management Software
Intel® Server Board S5000VSA
6
4) Do not change the RMI port default value of 1099 unless this port is being used by another
application.
5) To enable security through 128-bit data encryption from the SyAM Software* server Web server
to the browser, choose the SSL option. The default is “No”.
6) After the installation has finished, the SyAM Software* services will start and dynamically
discover and configure the system's monitoring environment.
SyAM Software* Windows* Program Menu Options
For Microsoft* Windows* installations, a set of options under the program’s menu are provided. From
the start menu, select “All Programs” > “SyAM”. The following options appear (figure 2):
• Utilities
• Release Notes
• Remote Console User Settings
• Server Monitor Console
• User Manual
Figure 2 – SyAM Software* Program Menu Options
Under the “Utilities” sub-menu, the options are “Enable SCSI SMART Monitoring” and “XP-2003 Port
Update”, as shown in figure 3:
Figure 3 – SyAM Software* Program Menu; Utilities Options
If Microsoft* Windows* XP / 2003 Service packs are updated on the system after the software is
installed, the required firewall port must be opened by running the “XP-2003 Port Update” from the
“Utilities” option on the menu. This will open the required firewall ports and allow the software to
properly function. By default, the system drives are SMART*-monitored for predictive-drive failure
analysis if they are ATA or S-ATA. However, if the system utilizes a SCSI disk drive, choose “Enable
SCSI SMART Monitoring” and reboot the system to enable this feature.