Filter
Top Products
8 Intel® RAID Controller SASMF8I Hardware User’s Guide
10. Watch the boot process until you see a BIOS message to inform you of the key
combination to press to enter the Intel
®
Embedded Server RAID Technology II
Configuration Utility. A message similar to the following appears:
Press <CTRL> + <E> to run the Intel
®
Embedded Server RAID Technology
II Configuration Utility.
This message times out after several seconds. If you miss it, you will pass the option
to get into the Intel
®
Embedded Server RAID Technology II Configuration Utility.
The firmware takes several seconds to initialize and then displays the Intel
®
RAID
Controller SASMF8I number and firmware version. The numbering of the controllers
follows the PCI slot scanning order used by the server board.