Filter
Top Products
SE7210TP1-E-E CONFIGURATION GUIDE
4
Intel Server Platform SR1325TP1-E Configuration Overview
This section contains ordering and configuration information for the Intel Server Platform SR1325TP1-E. This is
an Intel designed and integrated 1U high density platform consisting of an SE7210TP1-E family server board
and an Intel 1U enclosure which is designed only to be supported and offered to customers as the Intel Server
Platform SR1325TP1 product sku.
Note: Intel is not offering a stand alone SR1325-E chassis sku for the SE7210TP1-E product family.
Customers configuring with third party high density chassis solutions should order one of the four SE7210TP1-E
board configurations described in the previous section (See section 1 of the SE7210TP1-E Board Configuration
Overview)
1. The SR1325TP1-E integrated server platform contains five fans and a 250W Power Supply. The Intel
Server Platform SR1325TP1-E includes:
• 1U SR7210TP1-E server board
• 1U SR1325-E chassis with 250W Power Supply
• Chassis cooling fans and ducting
• 1U Intel designed heatsink and heatsink mounting plate
• CD cable
• Floppy cable
• CD and floppy filler panel
• Intel cosmetic bezel
• North American power cord (varies by sku – see ordering tables below)
• Front panel board and cable (34-pin baseboard header to front panel)
• One PCI riser card assembly (one PCI-X capable slot)
• Intrusion switch
• Floppy/CD bracket assembly
• HDD Carrier Trays (2)
• I/O gasket
• Fixed drive bay supporting two cabled IDE, SATA or SCSI HDD’s (SCSI cable not included)
Note: A KDK Accessory Kit ships with the Server Platform SR1325TP1-E and includes the following
additional items. (This kit is included with the Server Platform SR1325TP1-E)
¾ 2 SATA Cables
¾ 1 IDE Cable
¾ Flex circuit CD interface board to floppy drive cable
¾ CD Interface board and mounting screws
¾ Floppy mounting screws
¾ Boxed board configuration label
¾ Rack handles (2) and screws
¾ Cable ties
¾ Quick start guide
¾ Appropriate additional screws
¾ 2 CD-ROMs
o Intel Server Management 5.8 software,
o Resource CD with software drivers, utilities software, configuration tools, and technical
information
• Rack rails are not
included but are available as a separate accessory item (see ordering tables below)
• Support for 3
rd
HDD (SATA or IDE) via an accessory kit upgrade (see ordering tables below)