Intel SCB2 Computer Hardware User Manual


 
All products,dates,and figuresspecified are preliminarybasedoncurrentexpectations,providedforplanning purposesonly,and aresubjectto
change without notice.Availability in different channels may vary.
Information in this document is provided in connection with Intel
®
products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except
as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel
®
prod-
ucts including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for
use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
Intel, Intel logo, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2001, Intel Corporation.
Intel Literature Center: 1-800-548-4725
0901/SJ/DMW/MD/PP/15K ORDER NUMBER 283951-001
Intel
®
Server Board SCB2 Specifications
Input/Output Features
PCI Triple Peer PCI,up to six PCI slots on
risers in a 2U system
Bus A: 32-bit/33-MHz
Bus B: 64-bit/66 MHz
Bus C: 64-bit/66-MHz
IDE One EIDE channel for a total of two IDE
devices
USB Two stacked USB connectors
Serial ports External RJ45 serial,InternalCOM1header
Floppy Controller 1.44 MB, 2.88 MB,3-mode support
Keyboard/Mouse PS/2, 8240A-compatible
Server Management Features
1
Remote Management Remote access to system status, logs,
configuration data, and utilities–without
a remote management card
Event filtering and alerting through
proactive LAN and mobile devices
System Monitoring System healthindicators and corrective
and Auto-recovery actions including:
Automated power cycling
OS watchdog timer
Fault-resilient booting
Server Troubleshooting Continuous health monitoring, text
console redirection, and error logs
Operating Systems Microsoft* Windows* 2000, Microsoft*
Supported Windows NT*,Red Hat* Linux*,SCO
UnixWare*, and Novell* NetWare*
System BIOS
BIOS Type 8 MB Flash EEPROM with AMI* BIOS,
Multi-boot BBS (BIOS Boot Specification)
1.4-compliant
Special Features Plug and Play, IDE drive auto-configure,
SMBIOS 2.3, ECC/Parity support,
multilingual support
Configuration Utilities System Set-up Utility (SSU) enables
easy system setup of BIOS and utilities,
Plug and Play
Processor/Cache
Processors Supported Intel
®
Pentium
®
IIIprocessors with up to
512-KB of integrated L2 cache.
For thelatest processor support,visit:
http://support.intel.com/support/
motherboards/server
System Memory
Memory Capacity SixDIMMsocketsfor up to 6 GB of PC133
SDRAM (64 MB to1GB DIMMssupported;
memory must be populated in pairs)
Memory Type PC/133 registered SDRAM 72-bit ECC,
168-pin gold-plated DIMMs
DIMM Sizes 64MB,128MB,256 MB,512MB,1 GB
Memory Voltage 3.3V only
Error Detection Corrects single-bit errors, detects
double-bit errors (using ECC memory)
Integrated On Board
Chipset ServerWorks*EnterpriseServerSet*IIIHESL
Ultra160 SCSI Controller Adaptec* AIC7899 Dual Channel—two
Ultra160/LVD channels (connect via one
internal 68-pin wide connector,and one
68-pin high-density external SCSI
connector)
Maximum data transfer: 160 MB/sec
on each Ultra160/LVD channel
ATA/100 RAID Controller PromiseTechnologies*PDC20267ATA/100
IDE RAIDcontroller provides two channels
of ATA/100 IDE that can be configured
into either RAIDlevel 0orRAIDlevel 1
Maximum data transfer:100 MB/sec
on each ATA/100 channel.
Intel
®
Server Adapter Two Intel
®
PRO/100+Fast Ethernet
Controllers (Intel
®
82550PM)
Supports 10BASE-T and 100BASE-TX,
RJ45 output
Graphics ATI*Rage*XLSVGA PCI video controller
with 8 MB of video memory
Super I/O Controller National* PC97317*
For the most current product information on Intel server building blocks, visit: www.intel.com/go/serverbuilder
Jumpers and Front Panel Connectors
Front Panel Connectors Power LED,power on/off switch,reset
Jumpers CMOS clear,password clear,BMC boot
write protect, BIOS recovery
Mechanical
Server Board Style SSI Thin E-Bay
Server Board Size 12" x 13"
Server Board Power Requirements
+5V 7.06A maximum continuous current
+5V standby 1.54A minimum continuous current
+12V 5.0A maximum continuous current
+3.3V 12.0A maximum continuous current
-5V 0 maximum continuous current
-12V 0.25A maximum continuous current
Environment
Ambient Temperature
2
Operating (system):10°C to +35°C
Non-operating/storage (system):
-40°C to+70°C ambient
Relative Humidity Non-operating: 95%, non-condensing
@ 30°C
Product Regulations
Safety Compliance:
UL/CUL 950-CSA 950 (UL
Recognition Mark)
Europe/Russia EN60950; CE Mark-EU Directive
73/23/EEC; GOST-R Mark
International IEC60950
EMI Verification—
configured in a compatible
3
Intel host system
U.S. Verified to FCC,Class A
Canada Verified to ICES-003,Class A
Europe/Russia Verified to EN55022 (Class A) and
EN55024 (CE Mark—EU Directive
89/336/EEC)/GOST-R Mark
International/Japan Verified to CISPR-22/VCCI,Class A
Australia/New Zealand Verified to AS/NZS 3548,Class A
(C-tick Mark)
1. Full utilization of some server management features is dependent on the use of an Intel
®
server chassis.
2. Environment ambient temperature is the system intake measurement for an Intel
®
Server Board SCB2 installed in an Intel
®
Server Chassis SR1200.
3. Compatible host system denotes the system(s) with which Intel tested the board and found it compliant.
4. See http://support.intel.com for a complete list of Intel and third-party compatible chassis.
5. The order code listed is for a chassis with an AC power supply. See www.intel.com/go/serverbuilder for ordering information with respect to the –48V DC power supply.
6. See http://support.intel.com for a complete list of validated Intel and third-party adapter cards.
1U System with Integrated SCSI 1U System with 2U System with Integrated SCSI 2U System with
Integrated ATA/100 RAID Integrated ATA/100RAID
Intel
®
Server Board SCB2 SCB2SCSI SCB2ATA SCB2SCSI SCB2ATA
Intel
®
Server Chassis SR1200(1U rack) KCR
5
KCR
5
KSN
5
Reference Chassis only
4
or SR2200 (2U rack)
4
ChassisBackplane(required) BCR1USBPWB BCR1UABPWB Included with chassis
Redundant Power Module (optional) N/A N/A AXX2PSMODL350
Sliding Rails (optional) AXX1U2URAIL AXX1U2URAIL AXX1U2URAIL
CD-ROM/Floppy Module (optional) AXXCDFLOPPY AXXCDFLOPPY AXXCDFLOPPY
Locking Bezel (optional black or beige) ACRBEZBLACK or ACRBEZBEIGE ACRBEZBLACK or ACRBEZBEIGE ASNBEZBLACK or ASNBEZBEIGE
ICMB Board Assembly (optional) AXX2ICMBKIT AXX2ICMBKIT AXX2ICMBKIT AXX2ICMBKIT
RJ45 to DB9 Serial Connector Converter AXXRJ45DB9 AXXRJ45DB9 AXXRJ45DB9 AXXRJ45DB9
Chassis Spares Kits FCRSPRKIT FCRSPRKIT FSNSPRKIT
Intel
®
RAID Controller SRCMR (modular ROMB)
6
SRCMR SRCMR
Intel
®
Server RAID Controller SRCU31L(low profile)
6
SRCU31L SRCU31L
Intel
®
PRO/1000 XT Server Adapter(low profile)
6
PWLA8490XTL PWLA8490XTL PWLA8490XTL PWLA8490XTL
Recommended Configurations and Order Codes
The following table provides several suggested configurations for 1U and 2U systems. Please visit www.intel.com/go/serverbuilder for the most recent product updates.