Filter
Top Products
7
1 Description
Server Board Features
The SE7500WV2 is available in either SCSI or ATA hard drive interface versions as described in
Table 1. The features listed in Table 2 are common to both server board versions.
Table 1. Server Board Versions
Feature Description
SCSI Dual channel Ultra160 LVD SCSI accessible at rear panel I/O and internally
ATA Dual channel ATA 100 RAID
✏
NOTE
The feature set listed in Table 2 only reflects usage with either the 1U
Intel
®
SR1300 or the 2U Intel
®
SR2300 server chassis. Third-party or OEM
chassis may not provide all of the features listed below.
Table 2. Server Board Features
Feature Description
Processors
Dual processor slots supporting Intel
®
Xeon™ processors in an INT3/FCPGA Socket
604 package.
Memory Six dual inline memory module (DIMM) slots support:
• DDR-200 or DDR-266 compliant, ECC, registered, 72-bit, 168-pin, DIMMs
• From 256MB to 12 GB of memory
Graphics
Integrated onboard ATI RAGE
†
XL PCI SVGA controller.
Video Memory 8 MB SDRAM of video memory.
PCI bus Two PCI riser slots capable of supporting either of the following configurations:
• 1U configuration-one full-length, full-height 64-bit PCI riser slot and one Low Profile
(LP) 64-bit PCI riser slot.
• 2U configuration-three full-length, full-height 64-bit PCI riser slots and three LP 64-bit
PCI riser slots.
Network Dual on-board 10/100/1000 Network Interface Controllers (NIC).
System I/O
(See Table 1)
One PS/2
†
keyboard/mouse port (6 pin DIN).
One VGA video port (15 pin).
Two external USB ports, internal header providing two additional USB.
One external serial port (RJ-45), one internal COM 1 header.
One external SCSI port (SCSI server board only), one internal.
Two NIC ports (RJ-45).
Form Factor Server ATX form factor.