Intel SE8500 Computer Hardware User Manual


 
7 Selecting Options to Configure – Main Page
The initial options screen shows subgroups of components that SCW is capable of configuring. To
have SCW perform the configuration, the component must be checked on this menu. Items without
check marks will NOT be configured by SCW and will not appear in subsequent screens. Whether
or not the component is checked, it is still available on the server. If no items are checked, the
Continue Button will be disabled.
Defaults vary by platform but are shown by the following groups.
FRUSDR Configuration Options – choose which record sets to update
System Asset Tag
Remote Management (OOB) Options - access and alerts over LAN or Serial/Modem
Channels
Advanced Features Options – to set up IMM-Advanced Edition features (Telnet, SNMP, Web
Server, E-Mail, and ARSC (KVM).
Options may not always appear in the order that is listed here.
Configure FRU/SDRs
Intel® Servers come with FRU/SDRs pre-loaded but newer files may be available from the Intel
support website. Check under the specific platform at
http://support.intel.com/support/motherboards/server/
SCW only supports loading ASCII FRU data from a file named SCW_<platform>.cfg where the
<platform> designation is 3 characters long and designates the platform name.
Additionally, SCW will ask a series of questions to determine the exact configuration of the
platform and which options are desired. Choose the answer that most closely matches your
hardware configuration so the proper records will be loaded. The number of screens varies by
platform.
Figure 6. Typical SDR Question
11