Intel SSDSA2MH080G1 Computer Drive User Manual


 
Intel
®
X18-M/X25-M SATA SSD
Intel
®
X18-M/X25-M SATA Solid State Drive
Advance Product Manual July 2008
20 Order Number: 319765-002US
Intel
®
X18-M/X25-M SATA SSD
76 F 0106h Serial ATA capabilities
77 F 0h Reserved for future Serial ATA definition
78 F 0048h Serial ATA features supported
79 V 0040h Serial ATA features enabled
80 F 00FCh Major Version Number
81 F 001Ah Minor Version Number
82 F 746Bh Command set supported.
83 F 7C01h Command sets supported.
84 F 6163h Command set/feature supported extension.
85 V 7069h Command set/feature enabled.
86 V BC01h Command set/feature enabled.
87 V 6163h Command set/feature default.
88 V 407Fh Ultra DMA Modes
89 F 0001h Time required for security erase unit completion
90 F 0001h Time required for Enhanced security erase completion
91 V 0h Current advanced power management value
92 V FFFEh Master Password Revision Code
93 F 0h
Hardware reset result. The contents of bits (12:0) of this word shall change
only during the execution of a hardware reset.
94 V 0h Vendor’s recommended and actual acoustic management value.
95 F 0h Stream Minimum Request Size
96 V 0h Streaming Transfer Time - DMA
97 V 0h Streaming Access Latency - DMA and PIO
98-99 F 0h Streaming Performance Granularity
100-103 V 0950F8B0h Maximum user LBA for 48-bit Address feature set.
104 V 0h Streaming Transfer Time - PIO
105 F 0h Reserved
106 F 0h Physical sector size / Logical Sector Size
107 F 0h Inter-seek delay for ISO-7779 acoustic testing in microseconds
108-111 F Varies Unique ID
112-115 F 0h Reserved for world wide name extension to 128 bits
116 V 0h Reserved for technical report-
117-118 F 0h Words per Logical Sector
119 F 401Ch Supported Settings
120 F 401Ch Command Set/Feature Enabled/Supported
121-126 F 0h Reserved
127 F 0h Removable Media Status Notification feature set support
128 V 0021h Security status
129-159 X 0h Vendor specific
160 F 0h CompactFlash Association (CFA) power mode 1
Table 15. Returned Sector Data (Continued)
Word
F = Fixed
V = Variable
X = Both
Default Value Description