Filter
Top Products
PRODUCT BRIEF: Intel® Solid-State Drive DC S3500 Series
Technical Specifications
1
Model Name
Intel® Solid-State Drive DC S3500 Series
Capacity
2.5”: 80GB, 120GB, 160GB, 240GB, 300GB, 480GB, 600GB and 800GB
1.8”: 80GB, 240GB, 400GB and 800GB
NAND Flash Memory
20nm Intel® NAND Flash Memory Multi-Level Cell Compute-Quality Components
Bandwidth
2
Sustained Sequential Reads/Writes
2.5” 80GB: up to 340 / 100 MB/s
1.8” 80GB: up to 340 / 100 MB/s
120GB: up to 445 / 135 MB/s
240GB: up to 500 / 260 MB/s
160GB: up to 475 / 175 MB/s
400GB: up to 500 / 380 MB/s
240GB: up to 500 / 260 MB/s
800GB: up to 500 / 450 MB/s
300GB: up to 500 / 315 MB/s
480GB: up to 500 / 410 MB/s
600GB: up to 500 / 410MB/s
800GB: up to 500 / 450 MB/s
Read / Write Latency
50 µs / 65 µs
Random I/O Operations per Second
4KB
Reads / Writes
2.5” 80GB: up to 70,000 IOPS / 7,000 IOPS
1.8” 80GB: up to 70,000 IOPS / 7,000 IOPS
120GB: up to 75,000 IOPS / 4,600 IOPS
240GB: up to 75,000 IOPS / 7,500 IOPS
160GB: up to 75,000 IOPS / 7,500 IOPS
400GB: up to 75,000 IOPS / 11,000 IOPS
240GB: up to 75,000 IOPS / 7,500 IOPS
800GB: up to 75,000 IOPS / 15,500 IOPS
300GB: up to 75,000 IOPS / 9,000 IOPS
480GB: up to 75,000 IOPS / 11,000 IOPS
600GB: up to 75,000 IOPS / 11,000 IOPS
800GB: up to 75,000 IOPS / 11,500 IOPS
Interface
SATA 6Gb/s, compatible with SATA 3Gb/s and1.5Gb/s.
Form Factor, Height and Weight
2.5 inch and 1.8” Industry Standard Form Factor
Height: 2.5” 7.0 mm thick; 1.8” 5 mm thick
Weight: 2.5” 80GB - 240GB: 70 grams ± 2 grams
2.5” 300GB - 800GB: 72 grams ± 2 grams;
1.8” 80GB: 35 grams ± 2 grams
1.8” 240-800GB: 37 grams ± 2 grams
Life Expectancy
2 million hours Mean Time Between Failures (MTBF)
Lifetime Endurance
3
Up to 450TB Written
Usage
4
24/7 operation
Power Consumption
Read: 1.3 W Typical Write: 5.0 W Typical
Idle: 650 mW Typical
Operating Temperature
0° C to 70° C
RoHS Compliance
Meets the requirements of European Union (EU) RoHS Compliance Directives
Product Health Monitoring
Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.) commands
Product Ordering Information
To order, visit intel.com/go/ssd
1
Based on the Intel® SSD DC S3500 Series Product Specification.
2
Device measured using Iometer with 4K Random Writes QD=32 across 100% span of the drive. Latency measured using write transfer size of 4KB (4,096 bytes) and
queue depth set to 1.
3
Based on JESD218 standard with JESD219 workload
4
Based on JESDEC SSD standard JC64.8
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY
RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL
DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL
PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY
OCCUR.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked
“reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information
here is subject to change without notice. Do not finalize a design with this information.
Performance tests and ratings are measured using specific computer systems and/or components and reflect the approximate performance of Intel products as measured by those tests. Any
difference in system hardware or software design or configuration may affect actual performance. Buyers should consult other sources of information to evaluate the performance of systems or
components they are considering purchasing. For more information on performance tests and on the performance of Intel products, go to:
http://www.intel.com/performance/resources/benchmark_limitations.htm.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are
available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order
number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or by visiting Intel’s Web site at www.intel.com.
*Other names and brands may be claimed as the property of others.
Copyright © 2013 Intel Corporation. All rights reserved. Intel, the Intel logo, and Intel Inside are trademarks of Intel Corporation in the U.S. and other countries.
Printed in USA 9/2013/PsA/PDF Please Recycle 328964-001US