Filter
Top Products
3
Installation
1. Disconnect the power from the PC and open the PC case
2. Install the TC-card in any spare expansion card mounting slot.
3. Locate the hard-drive and disconnect the IDE hard drive ribbon cable
from the hard drive and connect it to the IDE hard drive connector on
the TC-card.
4. Connect a 3.5" floppy-drive-style power plug to the Power connector.
5. Ensure the TC-card is jumpered for Master (M).
6. Close the case and power on the PC
7. The PC should now behave like an IGEL Clever Client. See the IGEL
Clever Client user's guide for more information.
Additional installation notes and photographs are provided on the
next page
Power Connector
Master/Slave Jumper
40 pin IDE Connector
44 pin laptop compatible IDE
header (not normally used)
Figure 1
Principal features of the IGEL TC-card