Filter
Top Products
16
English
" # " If the installed CPU is an Intel Pentium 4 CPU supporting Hyper-Threading Technology,
the system will automatically provide this option.
3.3. Advanced BIOS Features
ø Allows the configuration of advanced settings such as boot sequence, password
check, etc.
nn
nn
n First / Second / Third Boot Device
The user can select the order in which the system will boot.
Options: Floppy, LS120,HDD-0~HDD3, SCSI, CDROM, ZIP,USB-FDD, USB-ZIP, USB-
CDROM, USB-HDD, LAN, Disabled
nn
nn
n Boot Up Floppy Seek
This feature controls whether the BIOS checks for a floppy drive while booting up.
(default:Disabled)
nn
nn
n Password Check
Allows user to set a password. To remove the password entry requirement, enter
SETUP and make sure there is no entry and then press <Enter>.
Options: System (Password entry is required during system start up and to enter
CMOS SETUP)
Setup (Password entry is required to enter CMOS SETUP)(default:Setup)
nn
nn
n CPU Hyper-Threading #
Allows user to enable the CPU Hyper-Threading function, of which must also be sup
ported by the operating system. (default: Enabled)
nn
nn
n Init Display First
Allows you to select whether to boot the system using the AGP graphics card or the PCI
graphics card.
Options: AGU (boot using AGU graphics card)
Onboard/AGP (boot using onboard AGP)
PCI(boot using PCI graphics card). (default: AGU)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Advanced BIOS Features
First Boot Device [Floppy]
Second Boot Device [HDD-0]
Third Boot Device [CDROM]
Boot Up Floppy Seek [Disabled]
Password Check [Setup]
CPU Hyper-Threading
#
[Enabled]
Init Display First [AGU]
Graphics Aperture Size [128MB]
Graphics Share Memory [8MB]
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults
Item Help
Menu Level}
Select Boot Device
priority
[Floppy]
Boot from floppy
[LS120]
Boot from LS120
[HDD-0]
Boot from First HDD
[HDD-1]
Boot from Second HDD