Intellinet Network Solutions 503358 Switch User Manual


 
FCC Warning
This device has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses and radiates radio frequency energy and,
if not installed and used in accordance with the user manual, may cause
interference, which the user will be required to correct at his own
expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures to correct.
PORTS & INDICATORS
Ports
The eight RJ-45 connections on the front panel (at right in image below)
match workstations, servers or other network devices to 10/100 Mbps
switching ports that sense 10/100M speed and automatically negotiate
full/half duplex mode, allowing you to connect the switch to 10Base-T and
100Base-TX devices. NOTE: The eight ports are also capable of 48 V
power-injector PSE (power source equipment) function (see Connections).
4
POWER
PoE
PoE
LINK/ACT
LINK/ACT
2 4 6 8
1 3 5 7
1 3 5 7
2 4 6 8