Filter
Top Products
5
Gigabit Ethernet
Desktop Switch
Broadband Router
Sample conguration
installation
Cat5/5e UTP/STP cables provide optimal performance; just make your
connections between the Gigabit Ethernet Desktop Switch and your
network devices. If a front-panel LED corresponding to any of the ve
or eight ports in use doesn’t indicate a link or activity, check the connected
device for proper setup and operation.
Plug the female end of the power adapter rmly into the receptacle on
the rear panel and the other end into an electrical outlet. Conrm that
the power LED is lit for a normal power status. NOTE: To ensure proper
operation, use only the power adapter included with the switch.
Prior to use, it is recommended that the device be placed/positioned:
• on a level surface that can support the weight of the switch (and any
other items that need to be considered);
• away from sources of electrical noise, such as transmitters, radios and
broadband ampliers;
• with a minimum of 25 mm of
clearance on the top and
sides for ventilation; and
• where it cannot be affected
by excessive moisture.