Filter
Top Products
Page 10
To switch modes you will need a pointy object,
such as a paper clip. While the receiver is plugged
into a USB port, press down on the recessed
button on the receiver. Each time you press the
button, it will move to the
next mode. Once set, the
mode is remembered for
next time.
Troubleshooting
Problem: When you plug the receiver into the
remote the light on the next slide button blinks
repeatedly for several minutes.
Solution: The remote and the receiver are unable
to pair. Unplug the receiver and try again. If this
continues please contact support.
Problem: When removing the receiver from the
remote, the indicator LED ashes red repeatly.
Solution: The batteries in the remote have
reached a low voltage level and need to be
replaced. The unit may continue to operate but
for a limited time.