45
Using Active Syne via Bluetooth
Important Notice: ActiveSync 4.0 needs to be
installed prior to installing the IOGEAR Bluetooth
software on your PC.
Start ActiveSync software on your PC
Click on File, then select Connection Settings
Check the box for “Allow connections to one of
the following:” and make sure the drop down
box stays on COM3. Click OK to continue
1.
2.
3.
On your Bluetooth enabled PDA phone, go to
Start -> Settings -> Connections, and tab on
Bluetooth
Turn on the Bluetooth
Go into the Bluetooth Manager
Tab on New, and tab on ActiveSync via
Bluetooth
Now you will go through the Bluetooth setup
process for ActiveSync, click Next to continue
The PDA phone will start searching for avail-
able devices. Tab on your active PC which has
the Bluetooth connection enabled
In the next screen, check the box for “Create
a shortcut for this connection”, and also check
the box for “Use a secure, encrypted connec-
tion.”
Tab Finish to continue
4.
5.
6.
7.
8.
9.
10.
11.