IOGear G-CS12 Switch User Manual


 
Hardware
Hardware
Require
Require
...
...
Console
One VGA, SVGA, or Multisync monitor capable of the highest
resolution that you
will be using on any PC in the installation
One PS/2 mouse
One PS/2 keyboard
or
One AT keyboard w/ a PS/2 keyboard adapter
PC
The following equipment must be installed on each PC that is to be
connected to
the system:
One VGA, SVGA or Multisync video card
One PS/2 mouse port
One PS/2 or AT keyboard port
* See the note under Cables in the next section.
Cables
Although it’s possible to use standard extender cables to connect
the PCs to the MiniView
TM
, for optimum signal integrity and to
simplify the layout we strongly recommend that you use the high
quality custom cables that are provided as part of the package.
Note: The keyboard and mouse cables have PS/2 connectors at
each end. If your PC uses a standard AT style keyboard socket,
you will need an AT-PS/2 keyboard adapter in order to plug the
cable into the PC’s keyboard port. Be aware, however, that
because of the wiring and pin assignments, attempting to use
standard extender cables with adapters at both ends will not work.
You cannot use an AT-PS/2 adapter at the end that plugs into the
MiniView
TM
.
The MiniView
TM
supports PS/2 mice only. Please note that
PS/2-serial converters will not afford proper functionality with
your MiniView
TM
KVM switch.
HardwareHardware Requirements Requirements
33