Filter
Top Products
5
• If you’re using a used hard drive with the RAID5 card you must perform the “Delete RAID Set” under
the BIOS settings. The reason this is necessary is because the used hard drive has system data on
it which may cause recognition issues when confi guring it for use with the RAID5 card.
• RAID 0 and RAID1 setups require at least 2 drives, with RAID5 requiring 3 drives and RAID10
requiring 4 drives.
If one hard drive only, make sure to have “Concatenate” or “Contiguous” setting.•
The setting of Raid 0, 1, 10, 5 and JBOD will appear on screen accordingly and automatically when •
Port Multiplier and multiple Drives be connected.