IOGear GICe720S3W6 Network Card User Manual


 
7
Windows XP Driver Installation
1. Power off the system. Insert the SATA Card into an available PCI slot. Connect serial ATA cable(s) to
the SATA port and serial ATA device(s). Power up the system.
2. Insert the Driver CD into the CD-RoM/DVD drive.
3. Press ‘S’ when setup asks if you want to specify an additional device. Press ‘Enter’ and select ‘Silicon
Image SiI 3132 SATALink Controller’.
4. Press ‘Enter’ again when prompted to continue.
5. Follow the setup instructions provided to select your settings for partition and le system choices.
6. Once the les have been copied over the PC will need to be rebooted for the drivers to take effect.
Reboot the PC once the installation process is complete.
Software Installation