IOGear GUC2015V Computer Hardware User Manual


 
8
The minimum hardware requirements for the PC are:
• PC with 1.2GHz or higher processor clock speed required. Intel Pentium/Celeron family, or AMD
K6/Athlon/Duron family, or compatible processor recommended
• 256 megabytes (MB) of RAM or higher (512MB Recommended)
• USB 2.0 port.
• 30Mb of available disk space
• Super VGA (800 x 600) or higher- resolution video adapter and monitor
• CD-ROM or DVD drive
Power
• The USB VGA Adapter may require an external power supply to operate correctly and conform to
USB2.0 speci cations. However, the Module is able to run from power supplied by the USB bus and
should run without any problems on the vast majority of systems. A 5V 400mA supply should be used
if external power to the USB VGA Adapter is required.
VGA Support
• The VGA output on the USB VGA Adapter is via a standard 15- pin HD Sub- D connector. This should
be connected directly to a computer monitor. The VGA connector may be plugged and unplugged
while the USB VGA Adapter is on. The USB VGA Adapter should be connected to a USB 2.0 port.