Filter
Top Products
20
21
Connecting to a USB Printer / Multifunction Printer
1. Connect the USB cable on your printer or multi
function printer to the IOGEAR GUIP204 and make
sure your printer is powered on. You will then see
the connected printer show up in the
IOGEAR Net
ShareStation
utility underneath the “IOGEAR
GUIP204…
” Select the printer from the list and click
on the “Connect” button.
Note: If your USB device does not show up on
the list, please try to disconnect and reconnect
the device to the GUIP204. Also, please make
sure the GUIP204 and your USB device are
powered on.