IOGear GUW2015V Network Card User Manual


 
20
21
Video Mode Conguration
By default, your installation will be set with the
best resolution for your computer and will extend
your screen to the right. You may change the
screen mode and the operation mode.
Note: If no output is seen on the monitor
connected to the Wireless VGA Adapter, it may
be in a mode which cannot be displayed by the
monitor. This can happen if the monitor does not
have its supported modes to the Wireless VGA
Adapter. Reduce the resolution of the primary
display until an image is shown.
There are two options to adjust the Resolution,
Color Quality, Screen Rotation, and Extended
or Mirror Mode. One is to click on the IOGEAR
DisplayLink Manager icon in the Windows tray
as shown above, another is to go to Control
Panel, double click on “Display”, then choose
“Settings” tab.
Mirror Mode
Mirror mode duplicates the primary display to the
monitor connected to the Wireless VGA Adapter.
The resolution, color depth and refresh rate of the
primary screen will be replicated to the monitor
connected to the Wireless VGA Adapter. If the
monitor connected to the Wireless VGA Adapter
supports a lower resolution than the primary
display, then a part of the screen is shown on the
mirrored display. As the mouse is moved around
the screen, the Wireless VGA Adapter display will
scroll to the current area.