Filter
Top Products
8
Installation
Wireless Setup with WPS
Step 1: Power on your Universal WiFi Hub using
either of these methods:
•ConnecttheACAdaptercabletoadevice.Make
sure that the device where you connect the AC
Adapter cable is powered on.
•ConnecttheWiFiHubtoanelectricaloutletwith
the included power adapter.
Note: It will take about 50 seconds to complete the
boot-up sequence. When complete, PWR (power)
LED will be active, and the WLAN Activity LED will
be blinking to show the WLAN interface is enabled.
Step 2: Use the included RJ-45 Ethernet cable to
connect the WiFi Hub with your device such as
Blu-ray player, HDTV, or game console.
Step 3: Refer to your wireless router’s user manual
to enable the WPS function, then press “WPS”
button on the back of WiFi Hub.
Your installation is complete. If asked for the type
of connection, make sure “WIRED” is selected on
your device.