Filter
Top Products
Battery and Hardware Installation
Keyboard Battery Installation
1. Open the battery cover on the back of the keyboard
2. Insert the included AAA battery as the diagram on the battery tray
indicates
3. Close the battery cover
Mouse Battery Installation
1. Open the battery cover on the bottom of the mouse
2. Insert one, or two of the included AA batteries as the diagram on the
battery tray indicates*
3. Close the battery cover
USB Receiver Installation
USB receiver is located underneath the mouse
1. Plug the USB receiver into an available USB port on your computer
2. Your Operating System will start to install the device driver
automatically
3. No additional software is needed. Enjoy your new keyboard and
mouse!
* Weight Control / Energy Management
The mouse can be used with a single AA battery to save weight, but battery
life will be significantly shorter.
Plug & Play
After the batteries and the USB receiver are installed, the keyboard and
mouse can be used. No software is needed!
Customize Mouse DPI
The mouse is equipped with a customizable DPI switch. The default setting
is 1500 DPI. Simply adjust the DPI sensitivity to your liking by pressing the +
/ - buttons on the mouse. Pressing the + / - buttons will adjust LED to Red,
Green, or Orange.
Each color represents a different DPI value:
Red: 1000 DPI
Green: 1500 DPI
Orange: 2000 DPI
4