Filter
Top Products
Coaxial Networks, Inc. Page 41 of 60
Loads the RF Attenuator with desired value.
Upcon RAS <high limit> <low limit>
Sets high and low values for RF ALC.
Upcon RAD
Disable RF ALC.
Upcon RAE
Enable RF ALC. This is the default setting.
Upcon RLS <RF Power limit>
Sets the RF power limit.
Upcon RPS <RF Power level>
Sets the RF Power.
Upcon RTD
Disable the RF Threshold.
Upcon RTE
Enable the RF Threshold.
Upcon RTS <high limit> <low limit>
Sets the desired value for the RF Threshold.
Upcon SC
Displays the current operating parameters for the upconverter.
Upcon SP
Displaces the IF and RF power coming to and from the upconverter module.