Filter
Top Products
Ethernet Setup
To setup the Q•100 Multidock Communications Cradle for Ethernet connectivity, you
will first need to download the following files from http://www.itronix.com/
product_support/downloads.asp to your Q•100 computer(s):
• pscradle-Itonix-x.xarmppc.CAB (x.x represents the latest version of this file)
• the latest image files for the Operating System and Q•100
To install and configure the PSCradle software on the Q•100:
1 Click the pscradle-Itronix-x.x.armppc.CAB file to install the PSCradle
software.
2 Go to Start > Programs > Communication and select Ethernet Cradle
Driver.
3 Check the “Enable Cradle Driver” check box.
4 Set the Auto Detect field to “Always Assume Cradle”.
5 Then, set the On Detect field to “Auto Connect”.
6 Disable ActiveSync on the Q•100 by selecting Start > ActiveSync > Tools >
Options. Make sure both check boxes on this screen are NOT checked.
7 Select OK to accept these settings.
MobileDox Net Software Setup
MobileDox Net software provides configuration and management of the Itronix
Multidock Cradle so it will fit the requirements of your network design.
NOTE MobileDox Net software should only be used by network or system
administrators.
To Install MobileDox Net on Your Host PC running Windows 2000 or Windows XP:
1 Download MdxSetup-Itronix-x.x.x.exe from http://www.itronix.com/
product_support/downloads.asp (x.x.x represents the latest version of this file).
2 Double-click MdxSetup-Itronix-x.x.x.exe to install the MobileDox Net cradle
manager software on your host PC.
3 Plug the Itronix Multidock Cradle into your existing ethernet network. By
default, the Multidock Cradle will attempt to obtain an IP address from your
DHCP server.
4 Run MobileDox Net to view and manage the Multidock Cradle status.
4