Filter
Top Products
Inverting the Image
10
When you need to remove the projector or replace
the lamp:
1 Disconnect all cables.
2 Hold the projector from underneath.
3 Remove the knurled knob that holds the pro-
jector to the mounting plate.
4 Slide the projector to release it from the quick
release bolts. The projector will come off of
the mounting plate. The mounting plate will
still be attached to the base box.
5 Replace the lamp as described in your LP 425
User’s Guide if needed.
6 Realign the quick release bolts in the keyhole
slots on the mounting plate.
7 Fasten the knurled knob.
ADJUSTING THE IMAGE
Inverting the Image
1 Press the
Menu
button on the keypad to dis-
play the projector’s on-screen menu.
2 Using the arrow buttons, move the cursor to
the Controls tab to display the Controls
menu.
3 Move the cursor to Ceiling, then click either
mouse button.