Filter
Top Products
17
You have now completed the installation of your new graphics adapter
on your system.
Upgrade Steps:
Add or change your video adapter to an existing system,
you may precede a few steps before you install the new
hardware and software (video display driver). The
followings are some of the considerations:
1. To change a new adapter, please remove the
existing video driver, or replace it to SVGA driver
from Windows®98/Me system before you remove
the existing hardware.
2. To add a new adapter, ensure the mainboard that
has available IRQ for new devices, and there is no
conflict between the others.
3. If you try add this video adapter to an ALL-IN-ONE
mainboard (which video port built-in already), then
you have to disable that port first. Otherwise, that
will be a problem for the new video adapter setup.
4. The driver installation for system upgrade as same
as below, if error occur when you proceed step 1, 2
or 3, please consult with your system dealer or the
existing hardware manufacturer support.