JVC DLA-F110 Projector User Manual


 
4725
455
4545
80
11 128
472
179
24
ø60
45 45
11 128
337
29091
11755
58
41 37
79
48
Top Bottom Front
Rear
Side (left)
External Dimensions
(unit: mm)
Optional Accessories
User-replaceable Lamp
PK-L2210U
3D Glasses
PK-AG1-B
3D Synchro Emitter
PK-EM1
Projection Distance Chart*
Specifications
Copyright
©
2011, Victor Company of Japan, Limited (JVC). All Rights Reserved.
DISTRIBUTED BY
Design and specifications are subject to change without notice. HDMI, the HDMI logo and High-Definition Multimedia Interface are registered trademarks of HDMI Licensing LLC.
The projector is equipped with a high-pressure mercury lamp, which may break, emitting a loud noise, when it is subjected to shock or after it has been used for some length of time.
Please note that, depending on how the projector is used, there can be considerable difference between individual lamps regarding how many hours they will operate before requiring replacement. The owner of the projector is responsible for all costs related to the replacement of the lamp.
l
The projector lamp requires periodic replacement and is not covered by warranty.
l
Please note that as the D-ILA device is manufactured using highly advanced technologies, 0.01% or fewer of the pixels may be non-performing (always on or off).
All pictures on this leaflet are simulated.
All brand or product names may be trademarks and/or registered trademarks of their respective owners. Any rights not expressly granted herein are reserved.
Printed in Japan
DLAC-0311
“JVC” is the trademark or registered trademark of Victor Company of Japan, Limited.
Display size (16:9) Projection distance
Screen diagonal (inch)
W (mm) H (mm) Wide (m) Tele (m)
60 1,328 747 1.78 3.66
70 1,549 872 2.09 4.28
80 1,771 996 2.40 4.89
90 1,992 1,121 2.70 5.51
100 2,214 1,245 3.01 6.13
110 2,435 1,370 3.31 6.75
120 2,656 1,494 3.62 7. 36
130 2,878 1,619 3.92 7.9 8
140 3,099 1,743 4.23 8.60
150 3,320 1,868 4.53 9.22
160 3,542 1,992 4.84 9.84
170 3,763 2,117 5.14 10.45
180 3,984 2,241 5.45 11.07
190 4,206 2,366 5.75 11.6 8
200 4,427 2,490 6.06 12.30
DLA-F110
Device 0.7-inch D-ILA x3
Resolution Full HD D-ILA device (1,920 x 1,080)
Lens
2 x motorized zoom / focus
f=21.4mm - 42.8mm
F=3.2 - 4
Lens shift function ±80% vertical and ±34% horizontal (motorized)
Projection size 60 - 200 inches (screen diagonal)
Light source lamp
220W ultra-high pressure mercury lamp
(lamp life: approx. 3,000 hours with lamp used in Normal mode)
Brightness 1,700lm
Contrast ratio Native: 30,000:1
Input
terminals
Component 1 (RCA)
HDMI 2 (ver.1.4a, 3D, Deep Color)
Analog RGB (PC) 1 (D-sub 15-pin)
Output
terminals
Trigger 1 (mini jack, DC12V/100mA)
3D sync 1 (mini DIN 3-pin)
Control
terminals
RS232C 1 (D-sub 9-pin)
Remote 1 (mini jack)
LAN (RJ-45) 1
Analogue video input signal formats 480i/p, 576i/p, 720p 50/60, 1080i 50/60
Digital video input signal formats 480i/p, 576i/p, 720p 50/60, 1080i 50/60, 1080p 24/50/60
PC input
signal
HDMI VGA, SVGA, XGA, WXGA, WXGA+, SXGA, WSXGA+, WUXGA
Analog RGB
(D-sub 15-pin)
VGA, SVGA, XGA, WXGA, WXGA+, SXGA, SXGA+, WSXGA+,
1920 x 1080, MAC 13”, 16”, 19”
3D format
Frame packing 1080p 24, 1080i 50/60, 720p 50/60
Side-by-side 1080p 50/60, 1080i 50/60
Top and bottom 1080p 24, 720p 50/60
Power consumption current 3.5A
Allowable operating temperature range C to 35° C
Allowable operating humidity range 20% to 80%
Allowable storage temperature range -10° C to 60° C
Power requirement AC 110V - 240V, 50/60 Hz
Power consumption 350W (stand-by: 0.9W)
Dimensions: W x H x D, mm 455 x 179 x 472
Weight, kg 15.1
*Projection distances are design specifications, so there is ±5% variation.