Filter
Top Products
K3 System Page 3
Power Supply 1930077
Converts 110/ 220 /240 VAC to 24VDC
Single Slot Redundant Capable
Input Power
Nominal : 120/240 VAC 50/60 Hz
Range : 100 - 240 VAC
Watts: 50
Fusing: 2 A
Environmental
Operating: 0 C - +65C
Physical
AC Input connector:
IEC 320 (C14) on rear panel
Alarm / Expansion connector
: 9 pin d-Sub
Contact Ratings: 1A @ 24VDC res.
The K3 series supports both internal and external power supplies. Internal power modules are available
to support worldwide A/C power, -48VDC and +24VDC power requirements. External power supplies
provide redundancy either when used in pairs, or when combined with an internal module.
Power Supplies Modules
The K3 Series can be powered by several types of power sources using four types of power supply
options; 90- 240VAC 50/60Hz Internal module, 90 -240 VAC External module, 48 VDC Internal module
and 24 VDC direct.
Combinations of 1 internal + 1 external supply or 2 external supplies can be used for redundant power
applications.
Dataprobe offers the following internal supply modules for the K-16 series:
193007
7 PS-R1-WRI Internal AC Power Supply 100-240VAC
193007
8 PS-R1-48 Internal -48VDC Power Supply
193007
9 PS-R1-224 Dual External 24VDC Power. For use with External AC Supply
Power Supply 1930078
Converts 48 VDC to 24VDC
Single Slot Dual Redundant Capable
Input Power
Nominal : 48 VDC
Range : 42 - 60 VDC
Watts: 75
Fusing: 2.5 A
Environmental
Operating: 0 C - +65C
Physical
DC Input Connector:
Screw Terminal Mating Connector Supplied.
Alarm / Expansion connector:
9 pin d-Sub
Contact Ratings: 1A @ 24VDC res.
ALARM
48VDC, 2A. MAX
INPUT
!
100 - 240 VAC
1.4A, 50-60 HZ
REFER TO MANUAL
ALARM