Filter
Top Products
7
ENGLISH
11. Example of a SCSI Cable Connection
● An operational error may occur when the total length of the internal and external SCSI cables exceed 3 meters
(with SCSI-2, 10 Mbytes/sec. sync). When the SCSI bus is used as SCSI-2, 5 Mbytes/sec. async, the total length of
the cables can be extended to up to 6 meters.
● Regarding the length of the provided SCSI cable is approx. 1 m (3.3 feet).
● The length of the SCSI cable inside the JVC CD/DVD Library refer to “CONNECTING SCSI CABLES AND POWER
CORD” in the operation manual for the main unit.
● Be sure to lock the connectors of the external SCSI cable once they are connected.
External SCSI cable to host computer's
SCSI host adapter No.2 for controlling
the Library
External SCSI cable to host computer's
SCSI host adapter No. 1 for controlling
the Library
Host computer
CD/DVD Library
To “SCSI-C”
connector
To “SCSI-A”
connector
SCSI cable (of high impedance, shielded design)
Attach the active
terminator to the
OUT connector.
Ⅵ When interconnecting the JVC CD/DVD Library and the host computer with a SCSI cable, use a high-impedance,
shield cable with two clamp filters fitted near both connectors.
Ⅵ Signal disturbance may occur if a high-impedance, shielded SCSI cable is not used. Also, the above clamp
filters are necessary for the JVC CD/DVD Library in order to comply with EMI Standard ‘EN55022 Class A’.
Pull the band tightly.
1
Fit the clamp filter around the cable.
Tighten until the dabs
are completely locked.
2
Press the clamp filter against the connector
and fasten it with a provided band.
Cut off any
extra length.
INSTALLATION PROCEDURE
INSTALLATION
PRECAUTIONS BEFORE USE
Ⅵ Read the following before installing this drive in your Library for the first time.
Ⅵ To mount this drive on the MC-8100U/8200U/8600U in your Library, the firmware of the CD/DVD Library should be
upgraded. Please change the ROM in the CD/DVD Library to the ROM provided with this drive.
Ⅵ For the ROM replacement method, consult your dealer or nearest JVC-authorized service agent.
Ⅵ Do not set the Power switch of the CD/DVD Library to ON until all of the work described above has been
completed.