Filter
Top Products
8
EXIT
PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT
– +
<MENU >
‰ SHARPNESS : 00
COLOR TEMP. : 6500
COLOR SYSTEM :
AUTO
ASPECT RATIO : 4–3
RGB/COMPONENT :
RGB
COMPO. LEVEL : 00
BLUE CHECK :
OFF
Menu items Purpose Setting range
SHARPNESS Picture sharpness
COLOR TEMP.
Color temperature of
white balance
COLOR
Color system
SYSTEM
ASPECT RATIO Aspect ratio
RGB/COMPONENT
Input RGB/COMPO. signal
system
COMPO. LEVEL Component level
BLUE CHECK Blue check ON/OFF
Front panel Function
Contents
button displayed
+ Increase (to max. value)
3
Forward the setting value
– Decrease (to min. value)
2
Reverse the setting value
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
Front panel Function
Contents
button displayed
PHASE ( ) ∞ Forward selection mark (
3
)
CHROMA ( ) 5 Reverse selection mark (
3
)
Front panel Function
Contents
button displayed
MENU EXIT
Quit (or Release) the <MENU>
screen
1
2
3
4
HOW TO USE THE MENU FUNCTIONS
• SHARPNESS • ASPECT RATIO • BLUE CHECK
• COLOR TEMP. • RGB/COMPONENT
• COLOR SYSTEM • COMPO. LEVEL
You can set the following menu items.
Set them depending on your needs.
1. Press the MENU button.
The <MENU> screen is displayed.
* The screen automatically disappears when no operation is
performed after about 5 minutes.
MENU
2. Press the PHASE ( ) or CHROMA ( ) button
to select MENU items.
A selection mark (
3
) is put next to the selected item.
PHASE CHROMA
SHARPNESS
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
RGB/COMPONENT
COMPO. LEVEL
BLUE CHECK
3. Press the VOLUME/SELECT button to set.
4. If you want to set the other menu items, repeat
procedures 2 and 3.
5. Press the MENU button to quit.
1 Selection mark (
3
): Indicates the
menu item you select.
2 Menu item: Menu items you can
select.
3 Setting display: Indicates the current
settings (value).
4 Function display: The functions of
the front panel buttons (7 buttons on
the left) correspond to the function
displayed.
Notes:
● When the screen aspect ratio is set to
16 - 9 (16:9) in ASPECT RATIO, the
picture will be vertically reduced.
● When REMOTE is displayed in the
ASPECT RATIO or RGB COMPONENT
status, it is not possible to set these items
because ASPECT REMOTE or INPUT
REMOTE in the <SET-UP MENU> is set to
valid. Use the external control function or
set ASPECT REMOTE or INPUT REMOTE
to invalid (OFF) to make setting possible.
● The BLUE CHECK function is not
memorized. After the power is turned off
and on again, BLUE CHECK is automati-
cally set to OFF. Refer to page 9 for more
information about the BLUE CHECK
function.
● When selecting COMPONENT, adjust
CHROMA GAIN (COLOR) in the COMPO.
LEVEL item first, then input a standard
signal from the device used with the
monitor and adjust CHROMA GAIN with
BLUE CHECK. Refer to page 9 for more
information about initializing COMPO.
LEVEL.
<MENU> screen
<Front panel button>
Function
Contents
displayed
∞ Forward the menu item.
5 Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
3
Forward the setting value.
2
Reverse the setting value.
EXIT Exits the <MENU> screen.
DISPLAY AND SELECTION IN THE <MENU>
SCREEN MODE (SETTING)
MENU
VOLUME/SELECT
– +
00 +1 +39 +40
9300 6500
AUTO NTSC AUTO PAL
4 – 3 16 – 9
RGB COMPO.
+01 +9 +10
–01 –39 –40
0
OFF ON