Filter
Top Products
6
PROGRAMMED DISC PLAY
m Insert a CD as described in the previous section and close the disc compartment.
m Silide the FUNCTION switch to the CD position.
m Press the PROGRAM button, ]P 01^ will show on the display, select the first track to
be played back using the SKIP forward/backward buttons, then press the PROGRAM
button again.
m Repeat this step to program additional tracks up to a maximum of 20 tracks.
m Press the PLAY/PAUSE button to begin Program playback and adjust the VOLUME
control as desired.
m To skip forward or backward through the programs, press the SKIP buttons.
m When the disc is through playing, it will stop.
Notes: - Press the STOP button to stop the program before it is finished.
- To clear the memorized tracks, press the PROGRAM button to enter the
Program mode (PROGRAM indicator will blink) and then press STOP
button or open the CD door as explained.
- Programming is the ability to select the order in which a series of tracks
will be played.
- Each track may be stored in the program memory as many times as
desired (up to 20 tracks).
- To repeatedly play the memorized tracks, press the REPEAT button
twice; the REPEAT indicator will light.
CLOCK SETTING
TO SET OR RESET THE ACTUAL TIME
m To set the minute: Press and hold the CLOCK ADJ button, then press the SKIP 9/M
button until the present minute appears in the display.
m To set the hour: Press and hold the CLOCK ADJ button, then press SKIP :/H button
until the present hour appears in the display.
TO SET OR RESET THE ALARM TIMES
m Slide the ALARM 1 or ALARM 2 switch to the ADJ position, the Alarm time will blink in
the display.
m To set the wake minute: Press the SKIP 9/M button until the desired wake minute
appears in the display.
m To set the wake hour: Press the SKIP :/H button until the desired wake hour appears
in the display.
m Slide the desired alarm switch (1 or 2) to the ON (Set) or OFF (Not Set) position.
Notes: - When the ALARM 1 or ALARM 2 switch is in the SET position, all CD and
function buttons will not operation, so make sure to return the switch to the
NO or OFF position after setting the alarm time(s).
- This unit has 2 alarms, each can be set for a different wake time.