Filter
Top Products
9
Setting the Heat Temperature
Your 6 heat controller features an ON/
OFF slide switch plus an easy to use
dial to select the temperature setting.
To switch the blanket on, move the
switch in a downward direction to the
‘ON’ position.
Adjust the heat temperature by
rolling the dial to select the desired
temperature setting between 1 and 6.
Setting 1 is the lowest setting and 6
is the highest. The 6 settings allows
you to choose the right balance of
heat depending on your personal
requirements. The numbers on the
electric blanket controller correspond
to the following temperatures:
1-2 = Low heat (for low, or gentle heat)
3-4 = Medium heat
5-6 = High heat (recommend for
preheating only)
NOTE: Use the high heat setting
to preheat your bed only.
The heat setting display screen is
illuminated when the blanket is turned
on, to enable easy adjustment in the
dark.
To switch the blanket off, move the
switch in an upward direction to the
‘OFF’ position.
NOTE: On initial use it is
recommended that the
blanket be set on ‘6’ for 3 hours
before sleeping on the bed.
This will assist in drying out
any moisture which has been
accumulated in the mattress.
You may notice an odour when using
the electric blanket for the first time,
due to the insulation material. This is
harmless and will subside quickly.
It is recommended that you do not
sleep on the electric blanket when it
is switched on. Should you choose to
leave your blanket on all night; setting
1 can be used.
Your blanket has a detachable
controller and waterproof element
which makes your blanket safe to
machine wash.
KEB413_IB_FA.indd 9 12/10/09 10:03 AM